Epilog Fusion Maker 12 40W CO2 vs. xTool P2 55W CO2
| Laser | ||
| Typ | CO2 Laser | CO2 Laser |
| Wellenlänge | 10,600 nm | 10,600 nm |
| Optische Leistung | 40 W | 55 W |
| Leistung | ||
| Arbeitsbereich | 610 × 305 mm | 600 × 308 mm |
| Höchstgeschwindigkeit | 90,000 mm/min | 36,000 mm/min |
| Fokus | Autofokus | Autofokus |
| Funktionen | ||
| Gehäuse | Ja | Ja |
| Luftunterstützung | Nein | Ja |
| Rotationsaufsatz-kompatibel | Ja | Ja |
| WLAN | Ja | Ja |
| Kamera | Ja | Ja |
| Physisch | ||
| Ca.-Preis | $9,995 | $4,999 |
| Erscheinungsjahr | 2022 | 2023 |
| Gewicht | 63 kg | 45 kg |
Vor- und Nachteile
Epilog Fusion Maker 12 40W CO2
Was uns gefällt
- Lowest-cost entry into Epilog's professional ecosystem
- IRIS™ camera included — precise artwork placement at this price is unusual
- Wireless + Ethernet + USB connectivity standard
- US-made with strong local support network
- Upgrade path within Epilog family
Achtung
- Slowest in Epilog lineup (60 IPS / 1.5 m/s) — stepper motors, not servo
- Air compressor not included (purchased separately)
- Smallest work area in the Epilog range
- Price is significantly above hobby CO2 desktops at similar specs
xTool P2 55W CO2
Was uns gefällt
- 55W CO2 tube cuts thick materials cleanly
- Built-in camera for auto-trace and positioning
- Pass-through slot for oversized materials
- Autofocus and air assist included
- Comprehensive safety features (lid detection, flame sensor)
Achtung
- Very high price ($4,999)
- Heavy and large footprint
- CO2 tube will eventually need replacing
- Requires proper ventilation setup
Kompatible Materialien
Epilog Fusion Maker 12 40W CO2
HolzAcrylLederPapierplasticStoffGlasStein
xTool P2 55W CO2
HolzAcrylLederPappeStoffPapierGummiSchaumstoffGlasStein
xTool P2 55W CO2 kostet $4,999 (50% weniger) als Epilog Fusion Maker 12 40W CO2, das $9,995 kostet.
xTool P2 55W CO2 hat 27% mehr optische Leistung (55W vs. 40W).
Epilog Fusion Maker 12 40W CO2 bietet einen 1% größeren Arbeitsbereich (610 × 305 mm vs. 600 × 308 mm).
Epilog Fusion Maker 12 40W CO2 hat eine 60% höhere Höchstgeschwindigkeit (90,000 mm/min vs. 36,000 mm/min).
Bei den Funktionen gilt: xTool P2 55W CO2 verfügt über Luftunterstützung, Epilog Fusion Maker 12 40W CO2 nicht.