Epilog Fusion Galvo G100 30W Fiber vs. LaserPecker LP5
| Laser | ||
| Typ | Fiber Laser | Fiber Laser |
| Wellenlänge | 1,064 nm | 1,064 nm |
| Optische Leistung | 30 W | 20 W |
| Leistung | ||
| Arbeitsbereich | 152 × 152 mm | 160 × 120 mm |
| Höchstgeschwindigkeit | 900,000 mm/min | 600,000 mm/min |
| Fokus | Manuell | Manuell |
| Funktionen | ||
| Gehäuse | Ja | Nein |
| Luftunterstützung | Nein | Nein |
| Rotationsaufsatz-kompatibel | Ja | Ja |
| WLAN | Ja | Ja |
| Kamera | Ja | Nein |
| Physisch | ||
| Ca.-Preis | $20,000 | $2,499 |
| Erscheinungsjahr | 2023 | 2024 |
| Gewicht | 59.5 kg | 6.02 kg |
Vor- und Nachteile
Epilog Fusion Galvo G100 30W Fiber
Was uns gefällt
- MOPA fiber — capable of full color marking on stainless and polished black on titanium
- IRIS™ camera integrated for easy part positioning
- Available up to 100W for deep engraving
- US-made with Epilog service network
- Breadboard table with tapped holes for fixturing
Achtung
- Small 6"×6" marking field — purpose-built for parts, not large sheets
- Price by contact; estimated well above consumer fiber markers
- Requires exhaust system (sold separately)
LaserPecker LP5
Was uns gefällt
- Dual 20W system: fiber for metals, diode for organics — broadest material coverage
- 10,000 mm/s galvo speed and 0.0027mm precision for production use
- Can cut thin metals (up to 0.5mm steel, 0.2mm aluminum)
- WiFi + LightBurn compatible; 6 kg compact body
- 3D embossing and color engraving on metals
Achtung
- Small 160×120mm working area (extendable to 160×300mm with Slide Extension)
- No built-in camera; Safety Enclosure with camera sold separately
- Manual focus; no autofocus
- No enclosure included — eye safety requires goggles or optional Safety Enclosure
Kompatible Materialien
Epilog Fusion Galvo G100 30W Fiber
steeltitaniumEloxiertes AluminiumbrasscopperplasticLeder
LaserPecker LP5
stainless steelaluminumbrasstitaniumsilverplatinumHolzAcrylLederGlasPapierGummi
LaserPecker LP5 kostet $2,499 (88% weniger) als Epilog Fusion Galvo G100 30W Fiber, das $20,000 kostet.
Epilog Fusion Galvo G100 30W Fiber hat 33% mehr optische Leistung (30W vs. 20W).
Epilog Fusion Galvo G100 30W Fiber bietet einen 17% größeren Arbeitsbereich (152 × 152 mm vs. 160 × 120 mm).
Epilog Fusion Galvo G100 30W Fiber hat eine 33% höhere Höchstgeschwindigkeit (900,000 mm/min vs. 600,000 mm/min).
Bei den Funktionen gilt: Epilog Fusion Galvo G100 30W Fiber verfügt über ein geschlossenes Gehäuse, LaserPecker LP5 nicht; Epilog Fusion Galvo G100 30W Fiber verfügt über eine Kamera, LaserPecker LP5 nicht.