Creality Falcon2 Pro 40W vs. xTool S1 40W
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 455 nm | 455 nm |
| Optische Leistung | 40 W | 40 W |
| Leistung | ||
| Arbeitsbereich | 400 × 415 mm | 498 × 319 mm |
| Höchstgeschwindigkeit | 36,000 mm/min | 36,000 mm/min |
| Fokus | Manuell | Autofokus |
| Funktionen | ||
| Gehäuse | Ja | Ja |
| Luftunterstützung | Ja | Ja |
| Rotationsaufsatz-kompatibel | Ja | Ja |
| WLAN | Nein | Ja |
| Kamera | Ja | Ja |
| Physisch | ||
| Ca.-Preis | $1,599 | $2,499 |
| Erscheinungsjahr | 2024 | 2024 |
| Gewicht | 18.56 kg | 20 kg |
Vor- und Nachteile
Creality Falcon2 Pro 40W
Was uns gefällt
- Includes a bonus 1.6W fine-detail laser module (not bundled with the 22W)
- 600mm/s CoreXY speed with enclosed camera positioning
- Deep cutting power at 40W inside a Class 1 enclosure
- Air assist and multi-point safety monitoring standard
Achtung
- No autofocus — manual leveling despite Pro branding
- No WiFi
- Pricier than the 22W tier for buyers who don't need the extra power
xTool S1 40W
Was uns gefällt
- Cuts 18mm wood and 15mm acrylic in one pass
- Can mark and score thin stainless steel
- Full Class 1 enclosure — no safety glasses required
- Built-in camera for precise placement
- Autofocus and air assist included
- Same fast 36,000 mm/min (600 mm/s) speed as 20W
Achtung
- Significantly pricier than the 20W variant
- Heavier than open-frame equivalents
- Enclosure limits maximum material height
- Diode still falls short of CO₂ for thick acrylic or glass
Kompatible Materialien
Creality Falcon2 Pro 40W
HolzAcrylLederPappeStoffPapierGummiSteinMetallgravur
xTool S1 40W
HolzAcrylLederPappeStoffPapierGummiSteinMetallgravurEloxiertes Aluminiumstainless steel
Creality Falcon2 Pro 40W kostet $1,599 (36% weniger) als xTool S1 40W, das $2,499 kostet.
Beide Maschinen haben die gleiche optische Leistung von 40W.
Creality Falcon2 Pro 40W bietet einen 4% größeren Arbeitsbereich (400 × 415 mm vs. 498 × 319 mm).
Beide Maschinen haben die gleiche Höchstgeschwindigkeit von 36,000 mm/min.
Bei den Funktionen gilt: xTool S1 40W verfügt über WLAN-Konnektivität, Creality Falcon2 Pro 40W nicht.