Creality Falcon T1 20W (5-in-1 Modular) vs. xTool S1 40W
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 445 nm | 455 nm |
| Optische Leistung | 20 W | 40 W |
| Leistung | ||
| Arbeitsbereich | 175 × 175 mm | 498 × 319 mm |
| Höchstgeschwindigkeit | 600,000 mm/min | 36,000 mm/min |
| Fokus | Manuell | Autofokus |
| Funktionen | ||
| Gehäuse | Ja | Ja |
| Luftunterstützung | Nein | Ja |
| Rotationsaufsatz-kompatibel | Ja | Ja |
| WLAN | Ja | Ja |
| Kamera | Ja | Ja |
| Physisch | ||
| Ca.-Preis | $2,249 | $2,499 |
| Erscheinungsjahr | 2026 | 2024 |
| Gewicht | 24.5 kg | 20 kg |
Vor- und Nachteile
Creality Falcon T1 20W (5-in-1 Modular)
Was uns gefällt
- Interchangeable modules (diode, fiber, MOPA, UV) cover engraving, deep cutting, and metal marking in one chassis
- Extremely fast galvo scanning up to 10,000 mm/s
- Tool-free module swaps in roughly 15 seconds
- Built-in HD camera with live preview and auto-positioning
- Fully enclosed Class 1 design with flame, tilt, and lid-interlock monitoring
Achtung
- Small 175×175mm work field versus 400mm+ gantry machines
- Expensive — additional laser modules cost roughly $2,700–$5,000 each
- Manual (not auto) height focus on the base diode module
- UV and MOPA modules had delayed availability at launch
- Brand-new 2026 platform with no long-term reliability track record yet
xTool S1 40W
Was uns gefällt
- Cuts 18mm wood and 15mm acrylic in one pass
- Can mark and score thin stainless steel
- Full Class 1 enclosure — no safety glasses required
- Built-in camera for precise placement
- Autofocus and air assist included
- Same fast 36,000 mm/min (600 mm/s) speed as 20W
Achtung
- Significantly pricier than the 20W variant
- Heavier than open-frame equivalents
- Enclosure limits maximum material height
- Diode still falls short of CO₂ for thick acrylic or glass
Kompatible Materialien
Creality Falcon T1 20W (5-in-1 Modular)
steelaluminumHolzAcrylEloxiertes Aluminiumplastic
xTool S1 40W
HolzAcrylLederPappeStoffPapierGummiSteinMetallgravurEloxiertes Aluminiumstainless steel
Creality Falcon T1 20W (5-in-1 Modular) kostet $2,249 (10% weniger) als xTool S1 40W, das $2,499 kostet.
xTool S1 40W hat 50% mehr optische Leistung (40W vs. 20W).
xTool S1 40W bietet einen 81% größeren Arbeitsbereich (498 × 319 mm vs. 175 × 175 mm).
Creality Falcon T1 20W (5-in-1 Modular) hat eine 94% höhere Höchstgeschwindigkeit (600,000 mm/min vs. 36,000 mm/min).
Bei den Funktionen gilt: xTool S1 40W verfügt über Luftunterstützung, Creality Falcon T1 20W (5-in-1 Modular) nicht.