Creality CR-Laser Falcon 10W vs. xTool D1 5W
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 455 nm | 455 nm |
| Optische Leistung | 10 W | 5 W |
| Leistung | ||
| Arbeitsbereich | 400 × 415 mm | 432 × 406 mm |
| Höchstgeschwindigkeit | 20,000 mm/min | 9,600 mm/min |
| Fokus | Manuell | Manuell |
| Funktionen | ||
| Gehäuse | Nein | Nein |
| Luftunterstützung | Nein | Nein |
| Rotationsaufsatz-kompatibel | Ja | Ja |
| WLAN | Nein | Ja |
| Kamera | Nein | Nein |
| Physisch | ||
| Ca.-Preis | $199 | $199 |
| Erscheinungsjahr | 2022 | 2022 |
| Gewicht | 3.2 kg | 5 kg |
Vor- und Nachteile
Creality CR-Laser Falcon 10W
Was uns gefällt
- Meaningful power step up from the 5W at a similarly low $199 price
- Cuts 6mm basswood or 5mm black acrylic in a single pass
- Same large 400×415mm work area
- Light and portable at 3.2kg
Achtung
- Class 4 (FDA) open-beam laser — safety glasses required and sold separately
- No air assist, camera, or WiFi included
- Manual focus only
- Oldest design generation in the current lineup
xTool D1 5W
Was uns gefällt
- Large work area for the price
- Compressed spot for finer engraving
- Compatible with xTool Creative Space and LightBurn
- Safety eye protection glasses included
- Good build quality with aluminium extrusions
Achtung
- No enclosure (safety concern without cover)
- No air assist included
- Relatively slow
Kompatible Materialien
Creality CR-Laser Falcon 10W
HolzAcrylLederPappeStoffPapierGummiStein
xTool D1 5W
HolzLederPappeStoffPapierGummi
Creality CR-Laser Falcon 10W und xTool D1 5W kosten mit $199 genau gleich viel.
Creality CR-Laser Falcon 10W hat 50% mehr optische Leistung (10W vs. 5W).
xTool D1 5W bietet einen 5% größeren Arbeitsbereich (432 × 406 mm vs. 400 × 415 mm).
Creality CR-Laser Falcon 10W hat eine 52% höhere Höchstgeschwindigkeit (20,000 mm/min vs. 9,600 mm/min).
Bei den Funktionen gilt: xTool D1 5W verfügt über WLAN-Konnektivität, Creality CR-Laser Falcon 10W nicht.