Creality CR-Laser Falcon 10W vs. Ortur Laser Master 3 Pro 10W
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 455 nm | 450 nm |
| Optische Leistung | 10 W | 10 W |
| Leistung | ||
| Arbeitsbereich | 400 × 415 mm | 420 × 430 mm |
| Höchstgeschwindigkeit | 20,000 mm/min | 20,000 mm/min |
| Fokus | Manuell | Autofokus |
| Funktionen | ||
| Gehäuse | Nein | Nein |
| Luftunterstützung | Nein | Ja |
| Rotationsaufsatz-kompatibel | Ja | Ja |
| WLAN | Nein | Ja |
| Kamera | Nein | Nein |
| Physisch | ||
| Ca.-Preis | $199 | $299 |
| Erscheinungsjahr | 2022 | 2023 |
| Gewicht | 3.2 kg | 5.5 kg |
Vor- und Nachteile
Creality CR-Laser Falcon 10W
Was uns gefällt
- Meaningful power step up from the 5W at a similarly low $199 price
- Cuts 6mm basswood or 5mm black acrylic in a single pass
- Same large 400×415mm work area
- Light and portable at 3.2kg
Achtung
- Class 4 (FDA) open-beam laser — safety glasses required and sold separately
- No air assist, camera, or WiFi included
- Manual focus only
- Oldest design generation in the current lineup
Ortur Laser Master 3 Pro 10W
Was uns gefällt
- Air assist included — improved cut quality
- Autofocus and WiFi
- Ortur safety system (tilt, flame detection)
- Good software ecosystem
- Suitable for semi-professional use
Achtung
- Open frame — no enclosure
- Higher price than competing 10W models
- No camera for positioning
Kompatible Materialien
Creality CR-Laser Falcon 10W
HolzAcrylLederPappeStoffPapierGummiStein
Ortur Laser Master 3 Pro 10W
HolzAcrylLederPappeStoffPapierGummiSteinMetallgravur
Creality CR-Laser Falcon 10W kostet $199 (33% weniger) als Ortur Laser Master 3 Pro 10W, das $299 kostet.
Beide Maschinen haben die gleiche optische Leistung von 10W.
Ortur Laser Master 3 Pro 10W bietet einen 8% größeren Arbeitsbereich (420 × 430 mm vs. 400 × 415 mm).
Beide Maschinen haben die gleiche Höchstgeschwindigkeit von 20,000 mm/min.
Bei den Funktionen gilt: Ortur Laser Master 3 Pro 10W verfügt über Luftunterstützung, Creality CR-Laser Falcon 10W nicht; Ortur Laser Master 3 Pro 10W verfügt über WLAN-Konnektivität, Creality CR-Laser Falcon 10W nicht.