Creality CR-Laser Falcon 10W vs. LaserPecker LP1 Plus
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 455 nm | 405 nm |
| Optische Leistung | 10 W | 0.6 W |
| Leistung | ||
| Arbeitsbereich | 400 × 415 mm | 100 × 100 mm |
| Höchstgeschwindigkeit | 20,000 mm/min | 36,000 mm/min |
| Fokus | Manuell | Manuell |
| Funktionen | ||
| Gehäuse | Nein | Nein |
| Luftunterstützung | Nein | Nein |
| Rotationsaufsatz-kompatibel | Ja | Nein |
| WLAN | Nein | Nein |
| Kamera | Nein | Nein |
| Physisch | ||
| Ca.-Preis | $199 | $219 |
| Erscheinungsjahr | 2022 | 2026 |
| Gewicht | 3.2 kg | 0.72 kg |
Vor- und Nachteile
Creality CR-Laser Falcon 10W
Was uns gefällt
- Meaningful power step up from the 5W at a similarly low $199 price
- Cuts 6mm basswood or 5mm black acrylic in a single pass
- Same large 400×415mm work area
- Light and portable at 3.2kg
Achtung
- Class 4 (FDA) open-beam laser — safety glasses required and sold separately
- No air assist, camera, or WiFi included
- Manual focus only
- Oldest design generation in the current lineup
LaserPecker LP1 Plus
Was uns gefällt
- 30x faster than the LP1 Pro at 600mm/s
- Extremely light and pocketable at 210g (laser unit) / 720g with stand
- 2-minute setup — no calibration required
- USB-C and power-bank powered for outdoor/mobile use
- Built-in clipart library and snap-and-engrave app workflow for total beginners
Achtung
- Very low 0.6W power — suited only to light engraving on soft materials, not cutting
- No enclosure included — optional protective panels sold separately
- Bluetooth only — no WiFi or USB data connection
- No rotary attachment support
- Fixed 200mm focal length — no autofocus unless the optional stand is purchased
Kompatible Materialien
Creality CR-Laser Falcon 10W
HolzAcrylLederPappeStoffPapierGummiStein
LaserPecker LP1 Plus
HolzLederPapierplasticAcrylStofffood
Creality CR-Laser Falcon 10W kostet $199 (9% weniger) als LaserPecker LP1 Plus, das $219 kostet.
Creality CR-Laser Falcon 10W hat 94% mehr optische Leistung (10W vs. 0.6W).
Creality CR-Laser Falcon 10W bietet einen 94% größeren Arbeitsbereich (400 × 415 mm vs. 100 × 100 mm).
LaserPecker LP1 Plus hat eine 44% höhere Höchstgeschwindigkeit (36,000 mm/min vs. 20,000 mm/min).
Bei den Funktionen gilt: Creality CR-Laser Falcon 10W verfügt über Kompatibilität mit einem Rotationsaufsatz, LaserPecker LP1 Plus nicht.