Atomstack A10 Pro vs. LaserPecker LP1 Plus
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 445 nm | 405 nm |
| Optische Leistung | 10 W | 0.6 W |
| Leistung | ||
| Arbeitsbereich | 410 × 400 mm | 100 × 100 mm |
| Höchstgeschwindigkeit | 10,000 mm/min | 36,000 mm/min |
| Fokus | Manuell | Manuell |
| Funktionen | ||
| Gehäuse | Nein | Nein |
| Luftunterstützung | Nein | Nein |
| Rotationsaufsatz-kompatibel | Ja | Nein |
| WLAN | Nein | Nein |
| Kamera | Nein | Nein |
| Physisch | ||
| Ca.-Preis | $289 | $219 |
| Erscheinungsjahr | 2022 | 2026 |
| Gewicht | 4.1 kg | 0.72 kg |
Vor- und Nachteile
Atomstack A10 Pro
Was uns gefällt
- Quad-diode 10W output for better cutting
- Adjustable focus for variable material heights
- Rotary attachment compatible
- Good value mid-range option
- GRBL compatible with LightBurn
Achtung
- No air assist included
- No WiFi — USB only
- Open frame design
LaserPecker LP1 Plus
Was uns gefällt
- 30x faster than the LP1 Pro at 600mm/s
- Extremely light and pocketable at 210g (laser unit) / 720g with stand
- 2-minute setup — no calibration required
- USB-C and power-bank powered for outdoor/mobile use
- Built-in clipart library and snap-and-engrave app workflow for total beginners
Achtung
- Very low 0.6W power — suited only to light engraving on soft materials, not cutting
- No enclosure included — optional protective panels sold separately
- Bluetooth only — no WiFi or USB data connection
- No rotary attachment support
- Fixed 200mm focal length — no autofocus unless the optional stand is purchased
Kompatible Materialien
Atomstack A10 Pro
HolzAcrylLederPappeStoffPapierGummiStein
LaserPecker LP1 Plus
HolzLederPapierplasticAcrylStofffood
LaserPecker LP1 Plus kostet $219 (24% weniger) als Atomstack A10 Pro, das $289 kostet.
Atomstack A10 Pro hat 94% mehr optische Leistung (10W vs. 0.6W).
Atomstack A10 Pro bietet einen 94% größeren Arbeitsbereich (410 × 400 mm vs. 100 × 100 mm).
LaserPecker LP1 Plus hat eine 72% höhere Höchstgeschwindigkeit (36,000 mm/min vs. 10,000 mm/min).
Bei den Funktionen gilt: Atomstack A10 Pro verfügt über Kompatibilität mit einem Rotationsaufsatz, LaserPecker LP1 Plus nicht.