AlgoLaser Pixi 5W vs. Sculpfun S30 Pro 10W
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 450 nm | 455 nm |
| Optische Leistung | 5 W | 10 W |
| Leistung | ||
| Arbeitsbereich | 100 × 100 mm | 380 × 385 mm |
| Höchstgeschwindigkeit | 6,000 mm/min | 6,000 mm/min |
| Fokus | Fest | Manuell |
| Funktionen | ||
| Gehäuse | Ja | Nein |
| Luftunterstützung | Nein | Ja |
| Rotationsaufsatz-kompatibel | Ja | Ja |
| WLAN | Ja | Nein |
| Kamera | Nein | Nein |
| Physisch | ||
| Ca.-Preis | $229 | $329 |
| Erscheinungsjahr | 2025 | 2023 |
| Gewicht | 3.75 kg | 6.8 kg |
Vor- und Nachteile
AlgoLaser Pixi 5W
Was uns gefällt
- Fully enclosed — safe for indoor/tabletop use
- Touchscreen + app control, very beginner-friendly
- Compact and portable
- CNET-recognized for ease of use
Achtung
- Small work area limits project size
- Can cut, but only thin materials
Sculpfun S30 Pro 10W
Was uns gefällt
- Built-in air assist pump
- Expandable to 920×380mm with Y-extension kit
- Good price-to-area ratio
- Strong community and software support
Achtung
- Large footprint may not suit small workshops
- No WiFi — USB only
- Frame rigidity decreases at max extension
Kompatible Materialien
AlgoLaser Pixi 5W
HolzLederPappePapierGummi
Sculpfun S30 Pro 10W
HolzAcrylLederPappeStoffPapierGummiStein
AlgoLaser Pixi 5W kostet $229 (30% weniger) als Sculpfun S30 Pro 10W, das $329 kostet.
Sculpfun S30 Pro 10W hat 50% mehr optische Leistung (10W vs. 5W).
Sculpfun S30 Pro 10W bietet einen 93% größeren Arbeitsbereich (380 × 385 mm vs. 100 × 100 mm).
Beide Maschinen haben die gleiche Höchstgeschwindigkeit von 6,000 mm/min.
Bei den Funktionen gilt: AlgoLaser Pixi 5W verfügt über ein geschlossenes Gehäuse, Sculpfun S30 Pro 10W nicht; Sculpfun S30 Pro 10W verfügt über Luftunterstützung, AlgoLaser Pixi 5W nicht; AlgoLaser Pixi 5W verfügt über WLAN-Konnektivität, Sculpfun S30 Pro 10W nicht.