AlgoLaser Pixi 10W vs. Sculpfun S9
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 450 nm | 450 nm |
| Optische Leistung | 10 W | 5.5 W |
| Leistung | ||
| Arbeitsbereich | 100 × 100 mm | 410 × 415 mm |
| Höchstgeschwindigkeit | 6,000 mm/min | 6,000 mm/min |
| Fokus | Fest | Manuell |
| Funktionen | ||
| Gehäuse | Ja | Nein |
| Luftunterstützung | Nein | Nein |
| Rotationsaufsatz-kompatibel | Ja | Ja |
| WLAN | Ja | Nein |
| Kamera | Nein | Nein |
| Physisch | ||
| Ca.-Preis | $329 | $189 |
| Erscheinungsjahr | 2025 | 2022 |
| Gewicht | 3.75 kg | 3 kg |
Vor- und Nachteile
AlgoLaser Pixi 10W
Was uns gefällt
- Fully enclosed — safe for indoor/tabletop use
- Touchscreen + app control, very beginner-friendly
- Compact and portable
- CNET-recognized for ease of use
Achtung
- Small work area limits project size
Sculpfun S9
Was uns gefällt
- Excellent value at under $200
- Ultra-thin 0.06mm compressed spot
- Easy 20-minute assembly
- Compatible with LightBurn, LaserGRBL
- Cuts 8mm pine cleanly
Achtung
- No air assist or enclosure
- No WiFi connectivity
- Open frame requires safe operating environment
Kompatible Materialien
AlgoLaser Pixi 10W
HolzLederPappePapierGummi
Sculpfun S9
HolzLederPappeStoffPapierGummiAcryl
Sculpfun S9 kostet $189 (43% weniger) als AlgoLaser Pixi 10W, das $329 kostet.
AlgoLaser Pixi 10W hat 45% mehr optische Leistung (10W vs. 5.5W).
Sculpfun S9 bietet einen 94% größeren Arbeitsbereich (410 × 415 mm vs. 100 × 100 mm).
Beide Maschinen haben die gleiche Höchstgeschwindigkeit von 6,000 mm/min.
Bei den Funktionen gilt: AlgoLaser Pixi 10W verfügt über ein geschlossenes Gehäuse, Sculpfun S9 nicht; AlgoLaser Pixi 10W verfügt über WLAN-Konnektivität, Sculpfun S9 nicht.