AlgoLaser DIY KIT Extended 10W (15.7"×33.5") vs. LaserPecker LP1 Plus
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 455 nm | 405 nm |
| Optische Leistung | 10 W | 0.6 W |
| Leistung | ||
| Arbeitsbereich | 400 × 850 mm | 100 × 100 mm |
| Höchstgeschwindigkeit | 12,000 mm/min | 36,000 mm/min |
| Fokus | Manuell | Manuell |
| Funktionen | ||
| Gehäuse | Nein | Nein |
| Luftunterstützung | Nein | Nein |
| Rotationsaufsatz-kompatibel | Nein | Nein |
| WLAN | Ja | Nein |
| Kamera | Nein | Nein |
| Physisch | ||
| Ca.-Preis | $289 | $219 |
| Erscheinungsjahr | 2024 | 2026 |
| Gewicht | 3.9 kg | 0.72 kg |
Vor- und Nachteile
AlgoLaser DIY KIT Extended 10W (15.7"×33.5")
Was uns gefällt
- Longer bed than the standard DIY KIT for bigger projects
- Budget-friendly for the extra work area gained
- Same simple GRBL operation as the standard kit
- More power than the 5W version for more projects
Achtung
- Camera, air pump are sold separately
- Larger footprint needed on the desk/bench
LaserPecker LP1 Plus
Was uns gefällt
- 30x faster than the LP1 Pro at 600mm/s
- Extremely light and pocketable at 210g (laser unit) / 720g with stand
- 2-minute setup — no calibration required
- USB-C and power-bank powered for outdoor/mobile use
- Built-in clipart library and snap-and-engrave app workflow for total beginners
Achtung
- Very low 0.6W power — suited only to light engraving on soft materials, not cutting
- No enclosure included — optional protective panels sold separately
- Bluetooth only — no WiFi or USB data connection
- No rotary attachment support
- Fixed 200mm focal length — no autofocus unless the optional stand is purchased
Kompatible Materialien
AlgoLaser DIY KIT Extended 10W (15.7"×33.5")
HolzLederPappeStoffPapierGummi
LaserPecker LP1 Plus
HolzLederPapierplasticAcrylStofffood
LaserPecker LP1 Plus kostet $219 (24% weniger) als AlgoLaser DIY KIT Extended 10W (15.7"×33.5"), das $289 kostet.
AlgoLaser DIY KIT Extended 10W (15.7"×33.5") hat 94% mehr optische Leistung (10W vs. 0.6W).
AlgoLaser DIY KIT Extended 10W (15.7"×33.5") bietet einen 97% größeren Arbeitsbereich (400 × 850 mm vs. 100 × 100 mm).
LaserPecker LP1 Plus hat eine 67% höhere Höchstgeschwindigkeit (36,000 mm/min vs. 12,000 mm/min).
Bei den Funktionen gilt: AlgoLaser DIY KIT Extended 10W (15.7"×33.5") verfügt über WLAN-Konnektivität, LaserPecker LP1 Plus nicht.