AlgoLaser Alpha MK2 20W Extended (15.7"×33.5") vs. LaserPecker LP2 Plus
| Laser | ||
| Typ | Diode Laser | Diode Laser |
| Wellenlänge | 455 nm | 450 nm |
| Optische Leistung | 20 W | 10 W |
| Leistung | ||
| Arbeitsbereich | 400 × 851 mm | 100 × 100 mm |
| Höchstgeschwindigkeit | 30,000 mm/min | 240,000 mm/min |
| Fokus | Manuell | Manuell |
| Funktionen | ||
| Gehäuse | Nein | Nein |
| Luftunterstützung | Ja | Nein |
| Rotationsaufsatz-kompatibel | Ja | Ja |
| WLAN | Ja | Ja |
| Kamera | Nein | Nein |
| Physisch | ||
| Ca.-Preis | $729 | $799 |
| Erscheinungsjahr | 2024 | 2026 |
| Gewicht | 6.5 kg | 3.39 kg |
Vor- und Nachteile
AlgoLaser Alpha MK2 20W Extended (15.7"×33.5")
Was uns gefällt
- Nearly double the Y-axis travel of the standard Alpha MK2 20W
- Same touchscreen control as the base model
- Good for signage and long, narrow workpieces
- Automatic air assist included
Achtung
- Larger footprint needs more desk space
- Open frame — no enclosure on this configuration
- Priced above the standard-bed Alpha MK2 20W
LaserPecker LP2 Plus
Was uns gefällt
- 4,000mm/s engraving speed — 6x faster than the base LP2
- 10W diode cuts 6mm basswood or black acrylic in a single pass
- WiFi connectivity (vs. Bluetooth-only on the base LP2)
- Fine 0.06×0.08mm laser spot for detailed engraving
- Broad SpinTrack/Rotary/Slide accessory ecosystem for expanded work areas
Achtung
- Small 100×100mm base work area without accessories
- No built-in camera or autofocus — manual dual red-dot focusing
- No air assist nozzle — relies on an exhausting fan for smoke clearance
- Class 1 safety requires the optional Standard Enclosure accessory
Kompatible Materialien
AlgoLaser Alpha MK2 20W Extended (15.7"×33.5")
HolzAcrylLederPappeStoffPapierGummi
LaserPecker LP2 Plus
HolzLederAcrylPapierSteinEloxiertes Aluminiumstainless steelGlasGummi
AlgoLaser Alpha MK2 20W Extended (15.7"×33.5") kostet $729 (9% weniger) als LaserPecker LP2 Plus, das $799 kostet.
AlgoLaser Alpha MK2 20W Extended (15.7"×33.5") hat 50% mehr optische Leistung (20W vs. 10W).
AlgoLaser Alpha MK2 20W Extended (15.7"×33.5") bietet einen 97% größeren Arbeitsbereich (400 × 851 mm vs. 100 × 100 mm).
LaserPecker LP2 Plus hat eine 88% höhere Höchstgeschwindigkeit (240,000 mm/min vs. 30,000 mm/min).
Bei den Funktionen gilt: AlgoLaser Alpha MK2 20W Extended (15.7"×33.5") verfügt über Luftunterstützung, LaserPecker LP2 Plus nicht.